ZSP-462 Steel Two-speed Hand Pump Steel, Two-speed Hand Pump Internal pressure relief valve for overload protection. 4-Way valving on the ZSP-464 for operation of double-acting cylinder. Large oil capacity to power a wide range of cylinders or tools. Model Number Pump Type Usable Oil Capacity Pressure Rating Oil Displacement per Stroke Max. Handle Effort Piston [...]
ZSP-392 Light Weight Two-speed Hand Pump Light Weight, Two-speed Hand Pump Internal pressure relief valve for overload protection. Durable glass-filled nylon reservoir and nylon encapsulated aluminum pump baser for maximum corrosion resistance. Two speed operation reduces handle strokes by as much as 78% over single speed pumps. Lower handle effort to minimize operator fatigue. Handle [...]
ZFSA Series Minimum Bolt Size: 16-31.5 mm Flange Wall Thickness: 16-31.5 mm Capacity: 1-10(10-90) ton(kN) Maximum Operating Pressure: 700 bar (Just for ZSFA-9TE) Hydraulic Fixed Flange Alignment Tool The Flange Alignment tools can be used to align or re-align flange joints during pipework construction, commissioning or during routine maintenance. The tool is attached to the [...]
ZLSW Series Maximum Spread Force: 16(157) ton(kN) Min. Clearance/ Max. Lift Ht.1): 9.9/51.3-69.11) mm Maximum Operating Pressure: 700 bar 1)Using Stepped block ZSWRFSB to increase wedge lifting height 30mm. Hydraulic Vertical Lifting Wedge Require 0.39″ (9.9mm) access gap. Lifting force 16 ton at 700bar hydraulic pressure. Automatic mechanical retraction (single acting spring return). Securely raises [...]
ZSWR&ZSWRM Series maximum Spread Force: 5-90 ton Tip Clearance/ Max. Spread1): 6/81 mm Maximum Operating Pressure: 700 bar 1)Using Stepped block. Hydraulic Spreader Only requests an access gap of 0.24″ (6mm). Automatic mechanical retraction. Unique interlocking: no first step bending and risk of slipping out of joint. Model Number Max. Spread Force Tip clearance Max. Spread [...]
ZSWF Series Capacity: 5 ton Tip Clearance/ Max. Spread: 23/76 mm Maximum Operating Pressure: 700 bar Hydraulic Spreader Jaws open parallel. Complete metal structure. Model Number Capacity Spread Oil Capacity Weight ton Min./Max. (mm) c.c kg ZSWF-5 5 23/76 81.9 6.2 ZSWF-10ST 10 3.7/103.7 160 6.35 ZSWF-5 ZSWF-10ST
ZRSCS Series Capacity: 10-90 ton Stroke: 38-62 mm Maximum Operating Pressure: 700 bar Single-Acting, Low Height Cylinders Maximum sized springs speed piston return and increase spring life. Lightweight, low profile design for use in confined spaces ,but stroke higher than ZRSSM. Grooved plunger end with threaded holes for mounting tilt saddles. Hard chrome plated plunger [...]
ZRSCH Series Capacity: 13-95 ton Stroke: 8-155 mm Center Hole Diameter: 19.6-79mm Maximum Operating Pressure: 700 bar Single-Acting, Hollow Plunger Cylinders Hollow plunger design allows for pulling and pushing application. Low profile and longer strokes fit in the tightest space. Withstands full “dead-end” loads. Collar threads for easy fixturing and all collar threads have a [...]
ZRSC Series CCapacity: 5-100 ton Stroke: 16-362 mm Maximum Operating Pressure: 700 bar Single-Acting, Spring return Collar thread Cylinders Equip with collar thread and base holes (on most model), for greater flexibility in mounting onto fixture.(see page 16 for details) Equip with inner plunger thread (5 ton to 30 ton) for greater flexibility in designing [...]
ZRSACH Series Capacity: 20-100 ton Stroke: 50-250 mm Maximum Operating Pressure: 700 bar Single-Acting, Hollow Plunger Aluminum Cylinders Maximum sized springs speed piston return and increase spring life. Special soft ring reduces wear caused by off-center loads. All cylinders are equipped with Lightweight, aluminum design for maximum portability. 7075-T6 Aluminum alloy components for maximum strength [...]
ZRSAC Series Capacity: 20-150 ton Stroke: 50-200 mm Maximum Operating Pressure: 700 bar Single-Acting, Aluminum Cylinders Lightweight, aluminum design for maximum portability. 7075-T6 Aluminum alloy components for maximum strength and minimum weight. Steel base plate and saddle for protection against piston rod damage. Anodizing treatment plunger, surfaces and inner of barrel resists damage and extends [...]
ZCSLSG Series Capacity: 50-1000 ton Stroke: 50-300 mm Maximum Operating Pressure: 700 bar Single-Acting, High Tonnage Cylinders Base mounting holes standard on all models. Single-acting, load return Hard chrome plated plunger and inner of barrel resists wear and corrosion. Plunger wiper reduces contamination, extending cylinder life. Integral stop ring provides piston blow-out protection Powder coat [...]